Circuit Scribe Conductive Ink Pen

FREE Shipping

Circuit Scribe Conductive Ink Pen

Circuit Scribe Conductive Ink Pen

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


When cured at 250 to 300 °F (120 to 150 °C) for 5 minutes, the ink achieves the maximum conductivity, durability, and chemical resistance. The conductive ink pen is very special as it contains around 20% pure silver and thus behaves very differently than a typical rollerball pen.

If the drawn trace must be soldered to, we recommended that tin/lead solder containing 2% silver be used and that the trace is heat-cured at 150 °F (66 °C) for five minutes to produce the most durable trace possible. Expose conductive surface of repair area: When repairing a trace, conductive ink needs to have good contact with the beginning and end of the gap. CircuitWorks Conductive Pens have a wide range of uses, from drawing traces between components on prototype circuit boards, coating components and assemblies to shield them from electrical and radio frequency interference, to repairing broken solder traces on PCBs and broken grid lines on automobile. Our products are intended for use only by qualified personnel in laboratory or industrial conditions.If soaking the tip assembly does not get the pen flowing, then the pen is probably past its usable shelf-life and should be replaced.

Instead of traditional methods like soldering, engineers can draw circuit traces directly onto a PCB using the conductive pen.The conductive ink pen is of good quality, and it is impossible to be non-conductive after painting and drying under normal use. No te olvides un paso muy importante: filtra los artículos que ofrecen ventajas extra como envío o devolución gratis, ¡y sacarás el máximo partido a tu experiencia de compra online! Remove the tip assembly and drop in into a small container of Flux-Off Heavy Duty or another suitable solvent. If the material needs to be applied in bulk, brushing, banding, or an automatic dispensing equipment may be used. If shaking the pen does not free the mixing bearing (you cannot hear it moving within the pen barrel) or the ink still refuses to flow when the pen tip is retracted, then the clogging within the tip assembly is more serious and will require a more rigorous cleaning to re-establish proper operation.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop